Conical Shape Activated Carbon Pollution Mask FFP2 Valved With Adjustable Nosepiece
1 . Descriptions
【High filtration】- High Technology Filters Almost 98% Of Airborne Particles Dust, Germs, Seasonal Allergies, Smoke, Car Exhausted Gas, PM 2.5 Pollution Ash.
【Designed for comfortable on-the-job protection】- Disposable Mask Is Lightweight, Humidity-resistant, Latex-free, Adjustable Metal Nose Strip And Comfortable Elastic Headband.
【Available 24/7】- Our Mask Can Be Used All Year In Any Weather Which Keeps You Safe From Fog, Smog, Dust, Germs, Bacteria, Viruses, Air Pollution, Allergens, And Humidity Thus Keeping You Healthy And Safe From Many Diseases.
【Size】- One Size Fits Most; Universal Contoured Design Provides A Snug Fit To Most Facial Profiles.
2 . Certification
This product has been tested according to the following European Standard:
| CE Standard for Disposable Respirators |
| EN: 149:2001 + A1:2009 |
| Distinguish | Filter Efficiency | Penetration | Resistant |
| FFP1 NR | ≧80% | < 20% | < 21mmH2O |
| FFP2 NR | ≧94% | < 5% | < 24mmH2O |
| FFP3 NR | ≧99% | < 1% | < 30mmH2O |
- EN149: 2001 +A1: 2009. Respiratory protective devices. Filtering half masks to protect against particles. Requirements, testing, marking.It complies with European Regulation (EU) 2016/425 on Personal Protective Equipment (PPE).Category III.
- EU type examination certificate (module B) issued by BSI , notified body n°0086.The PPE is subject to the conformity assessment procedure based on internal production control plus supervised product checks at random intervals (Module C2) set out in Annex VII under surveillance of BSI , notified body n°0086.
3 . How to use?
- Cup respirator in one hand with nosepiece at fingertips,allow headbands to hang freely below hand.
- Hold respirator under chin,with nose piece up
- Locate the upper strap across the crown of the head and the lower strap below the ears.
- Strap must not be twisted
- Using both hands,mould nose clip to the shape of the lower part of the nose to ensure a close fit and good seal.Pinching the nose clip using only one hand may result in less effective respirator performance.
- The seal of the respirator on the face should be fit-checked before entering the workplace.
- If the user feels the bottom strap is too loose and it is not possible to achieve a satisfactory fit of the mask a knot can be tied in the strap.
4. FAQ
Q: Can you provide free samples?
A: All samples are provided freely, it will takes3-5 days to prepare the samples.
Q: How does your factory control the quality?
A: All manufacturing are absolutely base on the pre-production samples. Meanwhile, we have a complete after-sales system.
Q: Could you embossed printing the logo on the face mask?
A: Yes, we can embossed printing the logo on the surface of face mask, OEM production is ok.
5. More pictures
